| Featured
Products |
|
| Hi-Pressure
Washers |
|
| Tube
Cleaning Systems |
|
| Replacement Flexible
Shafts |
|
Tube
Tools for Heat
Exchangers, Condensers
and Chillers |
|
| Vapor
Steam Cleaners |
| -
Models and Specifications |
Draught
Beer Line
Cleaning Pumps |
|
| Water
Brooms |
|
|
 |
Tube
Cleaning Systems
Brushes and
Accessories |
Brushes
1/4"-1"
Order
by Part Number and Size
1519
Nylon Condenser Brush (5 of 1 size
per package)
Recommended for removing soft deposits (mud, algae, etc.) in
straight, non-ferrous tubes (copper, brass, plastic, etc.).
Brush should be equal to or 1/16" smaller than tube I.D. (Sizes
shown are actual O.D. of brush.)
 |
| 1519-
|
1/4,
5/16, 3/8, Female |
| 1519-
|
7/16,
1/2, 9/16, 5/8, 11/16 3/4, 13/16, 7/8,
15/16, 1" |
|
|
|
1529
Brass Condenser Brush (5 of 1 size
per package)
Recommended for removing soft and light scale deposits in straight,
non-ferrous tubes. Brush should be equal to or 1/16" smaller
than tube I.D. (Sizes shown are actual O.D. of brush.)
 |
| 1529- |
1/4,
5/16, 3/8, Female |
| 1529- |
7/16,
1/2, 9/16, 5/8, 11/16 3/4, 13/16, 7/8,
15/16, 1" |
|
|
|
1539
Maxi-Grit Nylon (priced
per each)
Recommended for removing soft and light scale deposits in straight,
ferrous and non-ferrous tubes. The abrasive impregnated nylon
bristles of this brush clean and polish tubes in one step. Unlike
regular spiral brushes, Maxi-Grit is designed to be oversized
in the tube so the bristles lay over, putting the abrasive in
contact with the tube wall.
 |
| 1539-3/4 |
for
tubes 3/8-9/16 |
| 1539-1 |
for
tubes 5/8-11/16 |
| 1539-1
1/4 |
for
tubes 3/4-1" |
|
|
|
1549
Stainless Steel Condenser Brush (priced
per each)
Recommended for removing soft and light scale deposits in straight,
ferrous tubes (carbon steel, stainless steel, etc.) Brush should
be equal to or 1/1 6" smaller than tube I.D. (Sizes shown are
actual O.D. of brush).
|
| 1549- |
1/4,
5/16, 3/8, Female |
| 1549- |
7/16,
1/2, 9/16, 5/8, 11/16 3/4, 13/16, 7/8,
15/16, 1" |
|
|
|
1559
Maxi-Spin Clean Tapered Impregnated Nylon
(priced per each)
Recommended for removing soft and light scale deposits in straight
enhanced condenser tubes. The smaller diameter stands
stiff and cleans the grooves. The longer bristles lay flat to
clean the large areas between the grooves. The small diameter
of the brush should match the tube diameter.
 |
| 1559- |
1/2
(for 1/2" tubes) |
| 1559- |
5/8
(for 5/8" tubes) |
| 1559- |
3/4
(for 3/4" tubes) |
|
|
|
Brushes
over 1" Diameter
Order by Part
Number and Size |
 |
| 1519
Nylon - |
1
1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2,
2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4 |
| 1529
Brass - |
1
1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2,
2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4 |
| 1549
Stainless - |
1
1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2,
2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4 |
| 1569
Tempered Wire*- |
1
1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2,
2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4 |
|
|
*Tempered
wire double spiral
All Brushes over 1" diameter have 1/4 NPT male threads
and are available on special order |
Adjustable
Buffing Tools
Adjustable
Buffing Tools are used for removing light to medium scale deposits
or for finishing tubes previously "roughed out with other cleaning
tools. They can be used in both ferrous and non-ferrous straight
tubes. They can be used only in a clockwise rotation and not
recommended for internally enhanced tubes.
 |
| 1508- |
5/16"
to 3/8" |
| 1509- |
3/8"to
1/2" |
| 1510- |
1/2"
to 5/8" |
| 1511- |
5/8"
to 1" |
|
|
|
Brass
Tube Plug*
Our tapered tube plugs are used to seal the
ends of leaking chiller, condenser, or heat exchanger tubes.
Simply drive the plugs with a hammer to properly seat.
* Contact us for other sizes
 |
| BTP065 |
5/8"
(15.9 mm) OD with BWG range 15-22 |
| BTP075 |
3/4" (19.1
mm) OD with BWG range 15-22 |
| BTP088 |
7/8" (22.2
mm) OD with BWG range 15-22 |
| BTP100 |
1" (25.4
mm) OD with BWG range 15-22 |
|
|
|
Brush
And Buffing Tool Coupling Data
| Sizes
& Thread Data |
Coupling
Specifications |
1/4",
5/16", 3/8" (F)
Diameter Brushes have
8-32 Female Threads |
Requires
MV0832 Coupler to fasten brush to ALL 1/4" OD shafts,
one coupler is provided with each pack of five (5) brushes |
| 7/16"
(M) thru 1" Diameter Brushes have 1/4-28 Male Threads
|
Standard
Maxi-Vac brush. Couples to all 15XX-3/8, 18XX-3/8, 19XX-3/8,
18XX-1/2 and 19XX-1/2 series shafts. No couplers required |
| 1"
Diameter and over Brushes have 1/4 NPT Male Threads |
Standard
Maxi-Vac brush. Couples to 1825-1 and 1835-1 shafts for
use with Jet Mate 1800 Tube Cleaners: also couples to
1925-3/4 and 1935-3/4 shafts for use with JM1900 Tube
Cleaners. |
1508
Buffing Tools have
8-32 Male threads |
Couples
directly to 15XX-1/4, 18XX-1/4 and 19XX-1/4 shafts. For
use in 5/16" and 3/8" diameter tubes. |
1509,
1510, 1511
Buffing Tools have 1/4-28 Male Threads |
Couples
directly to 15XX-3/8, 18XX-3/8, 19XX-3/8, 18XX-1/2 and
19XX-1/2 shafts. For use in 3/8" ID thru 1"
ID tubes. |
|
|
